Dell N1100-ON Reference Manual page 2214

Parameter
Card Index (CID)
Card Model Identifier
If you supply a value for cardindex, the following additional information
appears as shown in the table below.
Parameter
Card Type
Model Identifier
Card Description
Example
This example shows the supported card types for the Dell EMC Networking
N4000 switch.
console>show supported cardtype
CID Card Model ID
--- --------------------------------
1 XLP308 Base CPU Card
2 Dell Networking N4032
3 Dell Networking N4032F
4 Dell Networking N4064
5 Dell Networking N4064F
6 Dell QSFP Card
7 Dell SFP+ Card
8 Dell 10GBase-T Card
Command History
Description updated in the 6.4 release.
Description
The index into the database of the
supported card types. This index is used
when preconfiguring a slot.
The model identifier for the supported
card type.
Description
The 32-bit numeric card type for the
supported card.
The model identifier for the supported
card type.
The description for the supported card
type.
Switch Management Commands
2214