View Panel (Ews Interface) - HP StorageWorks Edge Switch 2/12 Service Manual

9
A switch-to-PC Ethernet link problem (Ethernet too busy or IP address typed
incorrectly) is indicated.
1. Wait approximately five minutes, then attempt to login to the switch again.
2. At the Netsite field (Netscape Navigator) or Address field (Internet
3. Type the user name and password obtained in
Does the EWS interface appear operational with the View panel displayed?
YES
↓
10
At the View panel and Switch page, inspect the Status field at the top of the page.
Does the switch status indicate Operational?
NO
↓
11
Inspect Fibre Channel port operational states.
1. At the View panel, click the Port Properties tab. The Port Properties page
Edge Switch 2/12 Service Manual
Explorer), type http://xxx.xxx.xxx.xxx, where
xxx.xxx.xxx.xxx is the IP address of the switch (obtained in
username and password entry dialog box appears.
View panel does not display, wait another five minutes and perform this step
again.
NO
Perform fault isolation at the switch. Go to
YES
The switch appears operational. Exit MAP.
displays with port 0 displayed
step 1
(Figure 7).
Diagnostics
step 1). A
and click OK. If the
step 19.
35