Repair Information
Unblock a Port
To unblock a switch port from the EWS interface:
1. When the EWS interface opens, the View panel and Switch page appear as
2. Click the check box for the selected port in the Blocked column to remove the
3. Click Activate at the bottom of the page to save and activate the unblocked
110
the default. At the View panel, select the Configure option at the left side of
the panel. The Configure panel opens with the Ports page displayed
(Figure
24).
check mark and unblock the port. A blank box indicates the port is unblocked.
configuration. The message Your changes to the Port
Configuration have been successfully activated appears.
Edge Switch 2/12 Service Manual