HP StorageWorks Edge Switch 2/12 Service Manual page 164

Event Codes
Table 61: Event Code 508 (Continued)
Distribution: Switch
EWS
Event
Log
Table 62: Event Code 510
Message: SFP optical transceiver hot-insertion initiated.
Severity: Informational.
Explanation: Installation of a small form factor pluggable (SFP) optical transceiver was initiated
with the switch powered on and operational. The event indicates that operational
firmware detected the presence of the transceiver.
Action: No action required.
Event Data: Byte 0 = port number (00 through 11).
Bytes 4 through 7 = elapsed millisecond tick count.
Distribution: Switch
EWS
Event
Log
Table 63: Event Code 512
Message: SFP optical transceiver nonfatal error.
Severity: Minor.
Explanation: Switch firmware detected an SFP optical transceiver non-fatal error.
Action: Replace the failed transceiver with a functional transceiver of the same type.
Event Data: Byte 0 = port number (00 through 11).
Byte 1 = engineering reason code.
Bytes 4 through 7 = elapsed millisecond tick count.
Distribution: Switch
EWS
Event
Log
164
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event
Error Log
LED
E-Mail Call
Home
E-Mail Call
Home
E-Mail Call
Home
Edge Switch 2/12 Service Manual
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident