HP StorageWorks Edge Switch 2/12 Service Manual page 58

Diagnostics
14
Inspect the power supply (includes fan modules) operational state at the EWS
interface.
1. At the View panel, click the FRU Properties tab. The FRU Properties tab
2. Inspect the Status field for the power supply.
Does the Status field display a Failed message for the power supply?
NO
↓
15
Inspect the CTP card operational state at the EWS interface.
1. At the View panel, click the FRU Properties tab. The FRU Properties tab
2. Inspect the Status field for the CTP card.
Does the Status field display a Failed message for the CTP card?
NO
↓
Additional analysis is not described in this MAP. Go to
on page 32. If this is the second time at this step, contact the next level of support.
Exit MAP.
58
displays.
YES
A fan module or power supply failure is indicated. Replace the
switch. Exit MAP.
displays.
YES
A CTP card failure is indicated. Replace the switch. Exit MAP.
"MAP 0000: Start
Edge Switch 2/12 Service Manual
MAP"