Port Operational States And Actions - HP StorageWorks Edge Switch 2/12 Service Manual

Diagnostics
9
Inspect Fibre Channel port operational states at the EWS interface.
1. At the View panel, click the Port Properties tab. The Port Properties page
2. Click the port number (0 through 11) for which a failure is suspected to
3. Inspect the Operational State field. Scroll down the View panel as
4.
Table 9: Port Operational States and Actions
Operational State
Online
Port Failure
Offline
Not Operational
Testing
Not Installed
Invalid Attachment
Link Reset
Inactive
No light
Segmented E_Port
10
A switch port is unblocked and receiving the offline sequence (OLS) or not
operational sequence (NOS) from an attached device.
Inform the customer that the attached device failed or is set offline. Ask the
customer to take the appropriate corrective action. Exit MAP.
62
displays with port 0 properties displayed.
display properties for that port.
necessary.
Table 9 lists port operational states and MAP steps that describe fault
isolation procedures.
No action required. Exit MAP.
Go to step 9.
Go to step 10.
Go to step 10.
Internal or external loopback test in process. Exit MAP.
Go to step 11.
Go to step 23.
Go to step 34.
Go to step 35.
Go to step 39.
Go to MAP 0600: Fabric, ISL, and Segmented Port
Problem Determination.
Action
Edge Switch 2/12 Service Manual