HP StorageWorks Edge Switch 2/12 Service Manual page 96

Repair Information
96
Block Configuration - Indicates if a port is blocked or unblocked. Blocking a
port prevents the attached devices or fabric element from communicating. A
blocked port continuously transmits the offline sequence (OLS).
State - Port state (Online, Offline, Not Installed, Inactive, Invalid
Attachment, Link Reset, No Light, Not Operational, Port Failure,
Segmented E_Port, or Testing).
Type - Configured port type. Settings are:
— Fabric port (F_Port).
— Fabric mixed port (FX_Port). This setting also configures a port as a
fabric loop port (FL_Port).
— Generic port (G_Port). This selection is available only if enabled through
optional E_Port (or Full Fabric) feature key.
— Generic mixed port (GX_Port). This setting also configures a port as a
generic loop port (GL_Port). This selection is available only if enabled
through the optional E_Port (or Full Fabric) feature key.
— Expansion port (E_Port). This selection is available only if enabled
through the optional E_Port (or Full Fabric) feature key.
Edge Switch 2/12 Service Manual