HP StorageWorks Edge Switch 2/12 Service Manual page 77

2
Does the customer want to install the E_Port (or Full Fabric) feature key?
YES
↓
Install the E_Port (or Full Fabric) feature key. Refer to the HP StorageWorks
Edge Switch 2/12 Installation Guide for more information. Exit MAP.
3
Was an event code 011, 021, 051, 052, 061, 062, 063, 070, 071, 072, 140, 142, or
150 observed at the EWS Event Log?
YES
↓
4
Table 11
to isolate faults.
Table 11: MAP 600 Event Codes
Event
Code
011
021
051
052
061
062
063
070
071
072
Edge Switch 2/12 Service Manual
NO
The switch appears operational and the inability to configure E_Ports
and connect the switch to another fabric element is acceptable to the
customer. No action is required. Exit MAP.
NO
Go to step 5.
lists event codes, brief explanations of the codes, and suggested actions
Explanation
Login Server database invalid.
Name Server database invalid.
Management Server database invalid.
Management Server internal error.
Fabric Controller database invalid.
Maximum interswitch hop count exceeded.
Remote switch has too many ISLs.
E_Port is segmented.
Switch is isolated.
E_Port connected to unsupported switch.
Diagnostics
Action
Go to step 7.
Go to step 7.
Go to step 8.
Go to step 8.
Go to step 9.
Go to step 10.
Go to step 11.
Go to step 12.
Go to step 12.
Go to step 20.
77