HP StorageWorks Edge Switch 2/12 Service Manual page 120

Repair Information
8. After the switch IML and EWS session logout, the following message box
Figure 30: Firmware Upgrade Complete message box
9. Click here to login to the switch and start a new EWS session. A username
10. Type the user name and password.
Note:
The user name and password are case-sensitive.
11. Click OK. The EWS interface opens with the View panel open and the
120
displays (Figure 30).
and password entry dialog box displays.
The default user name is Administrator and the default password is password.
Switch page displayed.
Edge Switch 2/12 Service Manual