Map 0600: Fabric, Isl, And Segmented Port Problem Determination - HP StorageWorks Edge Switch 2/12 Service Manual

Diagnostics
40
Does the customer desire a device connection?
YES
↓
41
Connect a Fibre Channel device to the port as directed by the customer.
Did connection of a device to the port solve the problem?
NO
↓
42
A problem exists with the fiber-optic cable, attached device, or SFP optical
transceiver. Go to

MAP 0600: Fabric, ISL, and Segmented Port Problem Determination

This MAP describes fault isolation of fabric logout, interswitch link (ISL), and
E_Port segmentation problems. Failure indicators include:
1
Base product Fibre Channel ports on the Edge Switch 2/12 can be configured only
as F_Ports or fabric loop (Fx_Ports). Installation of the optional E_Port (or Full
Fabric) feature key is required to configure ports as E_Ports and enable ISL
connections to other fabric elements.
Is the E_Port (or Full Fabric) feature key installed on the switch?
NO
↓
76
NO
The switch appears operational and the No Light state is acceptable
to the customer. No action is required. Exit MAP.
YES
The switch appears operational. Exit MAP.
step 17.
An event code recorded at the EWS Event Log.
A segmentation reason associated with a Fibre Channel port at the EWS
interface.
YES
Go to step 3.
Edge Switch 2/12 Service Manual