Bytes 8 Through 11 Failure Reasons And Actions - HP StorageWorks Edge Switch 2/12 Service Manual

Did the corrective action solve the problem and relieve the reported low
BB_Credit condition?
NO
↓
Contact the next level of support. Exit MAP.
23
A 150 event code indicates a zone merge process failed during ISL initialization.
Either an incompatible zone set was detected or a problem occurred during
delivery of a zone merge frame. This event code always precedes a 070 event
code, and represents the reply of an adjacent fabric element in response to a zone
merge frame.
Obtain supplementary event data for each 150 event code.
1. At the EWS Event Log, examine the first 12 bytes (0 through 11) of event
2. Bytes 0 through 3 specify the E_Port number (00 through 11) reporting the
Table 14: Bytes 8 through 11 Failure Reasons and Actions
Bytes 8 - 11
01
08
09
0A
F0
F1
F2
Edge Switch 2/12 Service Manual
Increase the ISL link speed between the switches reporting the problem (from
1 Gbps to 2 Gbps).
Reroute Fibre Channel traffic by moving device connections to a
less-congested region of the fabric.
YES
The ISL appears operational. Exit MAP.
data.
problem. Bytes 8 through 11 specify the failure reason, as specified in
Table 14.
Invalid data length.
Invalid zone set format.
Invalid data.
Cannot merge.
Retry limit reached.
Invalid response length.
Invalid response code.
Failure Reason
Diagnostics
Action
Go to step 24.
Go to step 24.
Go to step 25.
Go to step 25.
Go to step 24.
Go to step 24.
Go to step 24.
87