HP StorageWorks Edge Switch 2/12 Service Manual page 165

Table 64: Event Code 513
Message: SFP optical transceiver hot-removal completed.
Severity: Informational.
Explanation: An SFP optical transceiver was removed while the switch was powered on and
operational.
Action: No action required.
Event Data: Byte 0 = port number (00 through 11).
Bytes 4 through 7 = elapsed millisecond tick count.
Distribution: Switch
EWS
Event
Log
Table 65: Event Code 514
Message: SFP optical transceiver failure.
Severity: Major.
Explanation: An SFP optical transceiver failed. The amber LED corresponding to the port
illuminates to indicate the failure. Other ports remain operational if their LEDs are
extinguished.
Action: Replace the failed transceiver with a functional transceiver of the same type.
Event Data: Byte 0 = port number (00 through 11).
Byte 1 = engineering reason code.
Bytes 4 through 7 = elapsed millisecond tick count.
Distribution: Switch
EWS
Event
Log
Edge Switch 2/12 Service Manual
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event
Error Log
LED
E-Mail Call
Home
E-Mail Call
Home
Event Codes
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident
165