Browser-Specific Message Box - HP StorageWorks Edge Switch 2/12 Service Manual

3. At the Download Firmware file from field, do one of the following:
4. Click Send and Load Firmware. A browser-specific message box displays
Figure 28: Browser-specific message box
5. Click OK to download the firmware version to the switch. The download
6. When the firmware version is downloaded to the switch and verified, the
Figure 29: Firmware Received message box
7. After firmware verification, the switch performs an IML that takes
Edge Switch 2/12 Service Manual
— Select the desired firmware file from the PC hard drive using the Browse
button.
— Type the desired firmware filename in the Download Firmware file
from field.
(Figure 28).
process takes several minutes to complete, during which the browser is
unavailable.
following message box displays
approximately 30 seconds to complete. During the IML, the
browser-to-switch Ethernet connection drops momentarily and the EWS
session is lost.
(Figure 29).
Repair Information
119