HP StorageWorks Edge Switch 2/12 Service Manual page 142

Event Codes
Table 28: Event Code 072
Message: E_Port connected to unsupported switch.
Severity: Informational.
Explanation: The switch is attached (through an ISL) to an incompatible fabric element (Director
or Edge Switch).
Action: Disconnect the ISL.
Event Data: No supplementary data included with this event.
Distribution: Switch
EWS
Event
Log
Table 29: Event Code 073
Message: Fabric initialization error.
Severity: Informational.
Explanation: An error was detected during the fabric initialization sequence, most likely caused
by frame delivery errors. Event data is intended for engineering evaluation.
Action: Perform the procedure described in
Event Data: Byte 0 = error reason code for engineering evaluation.
Bytes 4–9 = port numbers for which problems were detected.
Distribution: Switch
EWS
Event
Log
142
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event
Error Log
LED
E-Mail Call
Home
"Collect Maintenance Data" on page
E-Mail Call
Home
Edge Switch 2/12 Service Manual
Host
Sense Link
Info Incident
105.
Host
Sense Link
Info Incident