Browser-Specific Message Box - HP StorageWorks Edge Switch 2/12 Service Manual

Repair Information
Figure 31: Operations panel (Switch page with Reset Config tab)
5. Click Reset Configuration. A browser-specific message box displays
Figure 32: Browser-specific message box
6. Click OK to reset the configuration. The message Your changes have
7. The switch IP address resets to the default address of 10.1.1.10.
122
(Figure 32).
been successfully activated appears.
— If the configured IP address (prior to reset) was the same as the default
address, the browser-to-switch Ethernet connection is not affected and the
procedure is complete.
— If the configured IP address (prior to reset) was not the same as the default
address, the browser-to-switch Ethernet connection drops and the EWS
session is lost. Continue to the next step.
Edge Switch 2/12 Service Manual