4Di/2Ro Module - Satec EM132 Installation And Operation Manual

Installation
‎ C hapter 2

4DI/2RO Module

Relay Outputs
Digital Inputs
EM13x Series SMART MULTIFUNCTION METER
Before I/O Module installation ensure that all incoming power
sources are shut OFF. Failure to observe this practice can
result in serious or even fatal injury and damage to equipment.
Figure ‎ 2 -10 4DI/2RO Module Assembly
There are two relay outputs provided for energy pulsing, alarms, or
remote control.
Figure ‎ 2 -11 Relay Output Connection
Four optically isolated status inputs are provided for status monitoring,
pulse counting, external
synchronization.
Figure ‎ 2 -12 4 DI/2DO - Digital Input Connection
power demand period,
I/O Connections
and time
45