Satec EM132 Installation And Operation Manual page 97

Configuring
‎ C hapter 5
Using PAS
EM13x Series SMART MULTIFUNCTION METER
the EM13X Series
Select General Setup from the Meter Setup menu, and then click on
the Display Setup tab.
Figure ‎ 5 -13: General Setup Dialog Box – Display Setup Tab
The available options are listed in the table 17 below.
See Display Operations
functionality and configuring display options. See
information on display page contents and enumeration.
in Chapter 3 for more information on display
General Meter Setup
Data Displays for
97