Measurement Units; Data Displays; Test Mode Data Display; Billing Period Energy Data Displays - Satec EM132 Installation And Operation Manual

Em13 series smart multifunction meter
Hide thumbs Also See for EM132:
Table of Contents

Advertisement

Using
‎ C hapter 3
Front Display

Measurement Units

3.2 Data Displays

TEST Mode Data Display

Billing Period Energy Data Displays

EM13x Series SMART MULTIFUNCTION METER
The following table shows the display resolution for common displayed
quantities. All measured data is displayed in primary units.
Measured
Voltage Connection
Quantity
Energy
Power
(PT = 1.0)
Transformer
Voltage
(PT = 1.0)
Transformer
Current
The EM13X Series has 7 multi-page data displays listed in the following
table.
Display Sequence
1
2
3
4
5
6
7
The TEST data display is shown in TEST mode in place of the billing
period data displays, "NORM" is replaced by "TEST". See
Options and Mode Control
TEST mode.
DISPLAY
11:13:11
TEST
20/09/2011 T1
The EM13X Series provides billing period data displays for energy and
general purpose volume data as m³, cf or Ccf calculated using Digital
Input for water and/or gas meter application.
Only registers you selected in the billing/TOU register setup and tariff
rates listed in the TOU daily profiles are included (see
Billing/Tariff Registers
Chapter 5).
Units and Display Resolution
kWh, kvarh, kVAh with one decimal
place. The number of digits is
programmable (see
and Mode Control
Direct
kW, kvar, kVA with three decimal
places
MW, Mvar, MVA with three decimal
(PT>1.0)
places
Direct
Volts with one decimal place
Kilovolts with three decimal places
(PT>1.0)
Amperes with two decimal places
Display type
Billing/TOU reg.
Energy billing period data
TOU/Max. DEMAND Max. DMD Power billing period
data
Energy
Total and Phase Energy data
MAX. DEMAND
Engineering maximum demands
Measurement
Instrumentation data
Phase Rotation
Phase, I/O and Counter data
Diagnostics
Device diagnostics messages and
Device service data
in Chapter 5 on how to enter the meter
TEST mode display: test LED pulse rate in
secondary Wh/imp, test kWh and kvarh
energy registers readings in primary units
-
with an extended 0.001 kWh resolution.
and
Configuring the Daily Tariff Schedule
Data Displays
Device Options
in Chapter 5).
Display Contents
Device
Description
Configuring
in
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Em133Em133-se

Table of Contents