Local Time Settings - Satec EM132 Installation And Operation Manual

‎ C hapter 5
Configuring the EM13X Series

Local Time Settings

Using the Front Display
Locak Exit
Using PAS
98
Table 17: Display Setup Options
Display Label
Auto-Scroll
Scroll Seq.
Auto-Return
Backlight
Phase Power
Fundamental Power Fundamental
This setup allows you to specify your time zone, daylight saving time,
and clock synchronization options.
Select Local from the main menu. See
Options in Chapter 3 for information on configuring parameters via the
front display.
Select General Setup from the Meter Setup menu, and then click on
the Local Settings tab.
Parameter Options
Auto-Scroll Disabled,
Interval 2-10, 15, 20,
25, 30 seconds
Auto-Scroll 1
Sequence 1-2 to 1-7
1, 5
1, 5-6,
1, 5-7,
1-2, 5-7
1-3, 5-7
1, 6-7
1-2, 6-7
1-3, 6-7
1-4, 6-7
1, 7
1-2, 7
1-3, 7
1-4, 7
1-5, 7
3
3-4
3-5
3-6
3-7
3, 5
3, 5-6
3, 5-7
3, 7
5
5-6
5-7
5,7
Auto-Return Disabled,
1-5, 10, 15, 20,
25, 30 min
Backlight Time Continuous,
1-10 min
Phase powers Enabled
display mode Disabled
Enabled
component Disabled
display mode
Viewing and Changing Setup
EM13x Series SMART MULTIFUNCTION METER
General Meter Setup
Default Description
5 Defines the display
scroll interval or
disables auto-scroll
1 Selects the display
sequence for auto-
scrolling from 9
data displays (see
Data Displays
display
enumeration)
5 Defines the time
delay before
returning to the
default page
1 Defines the time
while the backlight
is ON
Disabled Disables or enables
phase powers in the
main display
Disabled Disables or enables
fundamental values
in the main display
for