Configuring Meter Security - Satec EM132 Installation And Operation Manual

‎ C hapter 5
Configuring the EM13X Series
Display
Label
End Week
End Day
End Hour
Clock Sync

5.3 Configuring Meter Security

Using the Front Display
100
Parameter
st
DST End Week 1 to 4
DST End Day The weekday
DST End Hour 1-6
Time None
DI1 1PPM
Synchronization
Input DI2 1PPM
DI3 1PPM
DI4 1PPM
DI5 1PPM
DI6 1PPM
DI7 1PPM
...
DI14 1PPM
Daylight Saving Time
When the daylight saving time is enabled, the meter automatically
advances the device clock by one hour when daylight saving time
begins and puts the clock back one hour when it ends. The default
daylight saving time change points are preset for the U.S.A.
The daylight saving time option is disabled in the PM130 by default. If
the daylight saving time option is disabled, you need to manually
adjust the device clock for daylight saving time.
Time Synchronization Pulses
External time synchronization pulses can be delivered through one of
the digital inputs.
If a digital input is selected as the time synchronization source, the
edge of an external pulse adjusts the device clock at the nearest whole
minute. The time accuracy could be affected by the debounce time of
the digital input, and by the operation delay of the external relay.
This setup allows changing the user password and enabling or disabling
password protection. The EM13X Series provides 3 configurable
passwords.
The password in your meter is preset to 0 at the factory, and password
protection is disabled.
Select the Access entry from the main menu. See
Changing Setup Options
parameters via the front display.
Options Default
th
and last First
Sunday
2
None
in Chapter 3 for information on configuring
EM13x Series SMART MULTIFUNCTION METER
Configuring Meter Security
Description
st
The 1 week of the month
when Daylight Saving Time
ends.
st
The 1 Sunday of the
month when Daylight
Saving Time ends.
The hour when Daylight
Saving Time ends.
The external port receiving
the time synchronization
pulses
Viewing and