Configuring The Display - Satec EM132 Installation And Operation Manual

‎ C hapter 5
Configuring the EM13X Series

Configuring the Display

Using the Front Display
Disp AutoScroll
5
96
This setup allows configuring the meter display. It also has an entry for
launching the meter Flash Loader.
Select the Disp entry from the main menu. See
Setup Options in Chapter 3 for information on configuring parameters
via the front display.
See Table 16 for the available options.
Table 16: Display Setup Options
Display Parameter
Label
AutuoScroll Display update
rate
AutoReturn Auto return to
the main screen
Backlight Display
Backlight period
Phas.Power Phase powers
display mode
Fund.Power Fundamental
component
display mode
Options Default
Disabled 5 sec
2 – 30sec
Disabled, 5 mn
1 – 30 mn
Continuous, 1
1 – 10 mn
Enabled Disabled
Disabled
Enabled Disabled
Disabled
EM13x Series SMART MULTIFUNCTION METER
General Meter Setup
Viewing and Changing
Description
Defines the interval
between display updates
Enables automatic return to
the main display if no
buttons are pressed for 5
minutes
Defines the display
backlight light on time
duration
Disables or enables phase
powers in the main display
Disables or enables
fundamental values in the
main display