Satec EM132 Installation And Operation Manual page 103

Configuring
‎ C hapter 5
Figure ‎ 5 -16: Energy/TOU Setup Dialog Box – Billing/TOU Registers tab
Table 19: Billing/TOU Register Options
Parameter
TOU
Use Profile
Dmd Profile
Sum Profile
Units
Source Input
Multiplier
Target
EM13x Series SMART MULTIFUNCTION METER
the EM13X Series
 Configure the register options according to the valid parameters shown
in Table 19.
Options
Unchecked
Checked
Unchecked
Checked
Unchecked
Checked
Unchecked
Checked
kWh, kvarh, kVAh,
m 3 , CF (cubic
foot), CCF
(hundred cubic
feet)
None
kWh Import
kWh Export
kvarh Import
kvarh Export
kvarh Q1-Q4
kVAh Total
kVAh Import
kVAh Export
kWh L1 Import
kWh L2 Import
kWh L3 Import
DI1-DI14
0.001 to 100.000
Reg#1- Reg#4
Default
Billing/TOU Registers
Unchecked Links tariff registers to the selected energy
source
Checked Enables recording energy registers in a daily
billing profile file (both total and tariff
registers if TOU is enabled).
Unchecked Enables recording maximum demand
registers in a daily billing profile file (both
total and tariff registers if TOU is enabled)
Checked Enables recording total (summary) registers
in a daily billing profile file.
None The register measurement units. When a
register is linked to an internal energy
source, it is set automatically. When an
external pulse source is used, the user can
select a measurement unit for the register.
Register Source List
None Links an energy source to the register
1.000 The multiplication factor for the energy
source. Unchangeable for internal energy
sources.
None Defines the target billing register for the
energy source. It is set automatically.
Configuring Billing/TOU
Description
103