I/O Connections; 2Di/1Ro Standard - Satec EM132 Installation And Operation Manual

‎ C hapter 2
Installation

2.6 I/O Connections

2DI/1RO Standard

Relay Output
Digital Inputs
44
Before I/O Module installation ensure that all incoming power
sources are shut OFF. Failure to observe this practice can
result in serious or even fatal injury and damage to equipment.
For I/O ratings, see Technical Specifications
The EM13X Series basic provides one dry contact relay (SSR FORM A)
for energy pulsing, alarms or remote control
Figure ‎ 2 -8 EM13X Series Relay output connection
Two optically isolated status inputs are provided for status monitoring,
pulse counting, external
synchronization.
Figure ‎ 2 -9 EM13X Series Digital Input connections
in Appendix A.
power demand
EM13x Series SMART MULTIFUNCTION METER
I/O Connections
period, and time