Device Info Display - Satec EM132 Installation And Operation Manual

Using
‎ C hapter 3
Front Display

Device Info Display

EM13x Series SMART MULTIFUNCTION METER
DISPLAY
Phase Rotation:
Error
DI: 123456
000000
Relays:
Counter 1:
Counter 2:
Counter 3:
Counter 4:
The device info display provides different service information that may
be required for meter identification and inspection, like product and
firmware information, communication settings, and so on, and shows
device diagnostic messages recorded as a result of the meter self-test
diagnostics during start-up and operation.
If there are diagnostic messages, Some of the diagnostics events are
cleared automatically as the event source disappears. See
Diagnostic Codes in Appendix G for a full list of diagnostic messages
and their meanings. See
how to clear the device diagnostics from the display and via PAS.
The diagnostic icon can be disabled or enabled via the
menu.
DISPLAY
Diagnostics:
8
Phase rotation order (Error, Positive,
Negative)
Digital Inputs status
123
Relays control status
000
Status/Event Counter 1
0
Status/Event Counter 2
0
Status/Event Counter 3
0
Status/Event Counter 4
0
Clearing Device Diagnostics
Power Down message
Data Displays
Description
Device
for information on
Display Setup
Description
67