Device
C hapter 6
Control and Upgrading
Figure 6 -5: Device Control Dialog Box – Communications Tab
6.5 Remote Relay Control
EM13x Series SMART MULTIFUNCTION METER
This window indicates the present GPRS communication status (see
Setting Up GPRS Network
TCP clients (see
Setting Up eXpertPower Client
Notification Client
in Chapter 5).
To clear the communication counters, click on Clear.
You can also clear the communications counters via the PAS Reset
dialog (see
Resetting Accumulators, Maximum Values and
You can use PAS to send a remote command to your meter to operate any
relay output or release a latched relay, except of the relays linked to an
internal pulse source. These relays are blocked for operating from outside
of the meter.
To access the relay control dialog, ensure that the On-line button on the
PAS toolbar is checked, select Device Control from the Monitor menu,
and then click on the Remote Relay Control tab.
in Chapter 5) and connection statistics of the
Remote Relay Control
and
Setting Up TCP
Files).
119