Satec EM132 Installation And Operation Manual page 70

‎ C hapter 3
Using Front Display
70
functions listed in the following table. Access to particular menus is
granted depending on the security level of the password you entered.
Menu
Label
Reset Reset of billing and engineering maximum
demands, device diagnostics, meter and failure
counters
RTC RTC clock setup
Basic Basic device setup
Options Device options setup
COM1 COM1 serial port setup
COM2 COM2 serial port setup
COM3 COM3 serial port setup
Local Local settings
Disp Display setup
Access Meter passwords setup
Loader Launches flash download via a local serial port
Access to the RESET menu entries is allowed depending on your
security level.
If your security level does not allow access to a menu, it will not be
listed in the main menu list, and you will not be able to highlight menu
items that you are not allowed to change, but you can still view their
present settings.
Menu Function
EM13x Series SMART MULTIFUNCTION METER
Programming Mode
Security Level
View Change
Low See
Table
below
Low Low
Low High
Low High
Low Medium
Low Medium
Low Medium
Low Medium
Low Low
High High
Medium Medium