Updating The Meter Clock - Satec EM132 Installation And Operation Manual

Device
‎ C hapter 6

6.2 Updating the Meter Clock

Using the Front Display
To change the time or date:
Reset Exit
SCROLL until
RTC menu
RTC Exit
LONG PRESS
RTC Oct 23,2011
Time 15:03:16
LONG PRESS
RTC Oct 23,2011
Time 15:03:16
SHORT PRESS
Moves to Date
Table 22: Clock Setup Options
Display
Label
Time
Month
name
Using PAS
EM13x Series SMART MULTIFUNCTION METER
Control and Upgrading
Select the RTC entry from the main menu.
When in RTC setup menu, applying a LONG PRESS on the
SELECT/ENTER button will display the Time/Date screen while Time
willflash. Another LONG PRESS on
flash the actual hour to be changed using
Table 22 describes available options.
Parameter
Time Hh:mm:ss
Date Mon XX, Year
Ensure that the On-line button on the PAS toolbar is checked, and
then select RTC from the Monitor menu or click on the Real-Time
Clock button on the PAS toolbar.
The RTC dialog box displays the current PC time and the time in your
meter.
Figure ‎ 6 -3: Real Time Clock Window
To synchronize the meter clock with the PC clock, click Set.
Options
Hours, minutes and seconds are
separated by ":". The time is displayed as
hh:mm:ss.
Month/Day Date and year are separated
by",". Where the first three letters
represent the month, then the day of the
months is represented by two digits and
finally the year presented by 4 digits
Updating the Meter Clock
SELECT/ENTER button will
SCROLL button
Description
117