Setting Up Expertpower Client - Satec EM132 Installation And Operation Manual

‎ C hapter 5
Configuring the EM13X Series

Setting Up eXpertPower Client

78
The following table lists available GPRS options.
Table 6: GPRS Setup Options
Parameter
Access Point Name (APN)
User name
Password
 Configure your mobile network APN, username and password. Consult
your network operator regarding proper network settings. Leave the
username and password fields blank if network authorization is not
required.
 Send your GPRS settings to the meter.
 Select the GPRS interface in the COM2 port setup (see
Communication Ports).
 Configure your eXpertPower client (see
or/and TCP Notification client (see
communicating with a remote server.
You can check the status of the GPRS communications from the front
panel via the Status Display
(see Viewing Communication Status and
The PM130 PLUS has an embedded eXpertPower
communications with
proprietary Internet services. Connections to the eXpertPower
are handled on a periodic basis.
To set up communications with the eXpertPower
Communication Setup from the Meter Setup menu, and then click
on the ExpertPower Client Setup tab.
Default
internetg The mobile network APN name
Username (if required)
Password (if required)
Setting Up eXpertPower
Setting Up TCP Notification
or via the Device Control dialog in PAS
Statistics).
TM
the eXpertPower
EM13x Series SMART MULTIFUNCTION METER
Configuring Communications
Description
Setting Up Serial
Client)
Client) for
TM
client that provides
server – the SATEC
TM
server
TM
server, select