Satec EM132 Installation And Operation Manual page 60

‎ C hapter 3
Using Front Display
2
Only from S/W V12.2.1
60
The following example demonstrates the present billing period displays
for two configured billing registers (kWh imported and kvarh imported)
and for three active tariff rates. The actual register contents in your
installation may be different depending on your selection of register
sources.
DISPLAY
Reg 1 Imp
725 kWh
Reg 1/T1 Imp
517 kWh
Reg 1/T2 Imp
114 kWh
Reg 1/T3 Imp
94 kWh
Reg 2 Imp
221 kvarh
Reg 2/T1 Imp
165 kvarh
Reg 2/T2 Imp
35 kvarh
Reg 2/T3 Imp
21 kvarh
Description
Total Import Active energy data.
Billing period according to TOU predefined
profile (Reg1 for TOU actve energy and
Reg2 for TOU reactive energy are
predefined TOU/Register factory setup,
can be changed by user, see
Billing/Tariff Registers
Daily Tariff Schedule
Tariff 1 Import Active energy data.
Tariff 2 Import Active energy data.
Tariff 3 Import Active energy data.
Total Import Reactive energy data.
Tariff 1 Import Reactive energy data.
Tariff 2 Import Reactive energy data.
Tariff 3 Import Reactive energy data.
Single Phase billing data
Total Import Phase 1 active energy data
Tariff 1 Import Phase 1 active energy
data.
EM13x Series SMART MULTIFUNCTION METER
Data Displays
Configuring
and Configuring the
in Chapter 5)
2