Satec EM132 Installation And Operation Manual page 101

Configuring
‎ C hapter 5
To change the password:
Access Passwrd 1
9
LONG PRESS
Access Passwrd 1
00000009
SHORT PRESS
Using PAS
To change the password:
EM13x Series SMART MULTIFUNCTION METER
the EM13X Series
 Apply LONG PRESS on ENTER button to select the Passwrd 1 entry
 Apply SHORT PRESS on ENTER button to select the password digit to
change.
 Apply LONG PRESS on ENTER button to exit the Passwrd 1 digit field
 Apply LONG PRESS on ENTER button to exit the Passwrd 1 field to
move to Access field
The new password is effective for both the display and
communication ports.
Ensure that the On-line button on the PAS toolbar is checked, select
Administration from the Monitor menu, and then select Change
Password -> Password 1.
An Authorization Required dialog box will ask for
administrator password to access the Change Password
menu.
Figure ‎ 5 -15: Password Setup Dialog Box
 Type in a new 8-digit password
 Repeat the password in the Confirm new password box
 Click Send
Configuring Meter Security
101