Wire Harness; Wiring Color Codes; Fuse Replacement - Mazda MX-5 1990 Workshop Manual

BfR BRIY
05UGIX-030
PULLER
t
~FUSE_,,--=--,--_
9MUGIX-032
CAUTION
Wire Harness
Wiring color codes
GI
Two-color wires are indicated by a two-color code symbol.
The first letter indicates the base color of the wire and the sec-
ond the color of the stripe.
CODE
B
BR
G
GY
L
LB
LG
Fuse
Replacement
COLOR
Black
Brown
Green
Gray
Blue
Light Blue
Light Green
CODE COLOR
0
Orange
P Pink
R Red
V Violet
W White
Y
Yellow
- -
1. When replacing a fuse, be sure to replace it with one of the
specified capacity.
If a fuse again fails after it has been replaced, the circuit
probably has a short and the wiring should be checked.
2. Be sure the negative battery terminal is disconnected be-
fore replacing a main fuse (80A).
3. When replacing a pullout fuse, use the fuse puller supplied
in the fuse box cover.
GI-17