Mazda MX-5 1990 Workshop Manual page 716

T
T-134
. AIR BAG SYSREM
05UOTX·357
05UOTX·358
• When placing a live air bag module on any surface,
always face the trim cover upward to reduce the mo-
tion of the module if it is accidentally deployed.
• When handling a deployed air bag module, wear
gloves and safety glasses, because the deployed
air bag module may contain deposits of sodium
hydroxide, a caustic by-product of the gas gener-
ant combustion.
• When an air bag module is to be disposed follow-
ing the proper procedure recommended for the
specific situation. (Refer to page T -160.)
4. CRASH SENSOR INSTALLATION
• Crash sensor oreientation is very important for prop-
er operation. If a vehicle is involved in a collision
where its front sheet metal is damaged, inspect the
body structure at the sensor mounting area for
deformation. If damaged, restore to its original
shape.
• When installing a crash sensor, be sure to tighten
the mounting bolts to the specified torque because
the sensor is grounded through the crash sensor's
mounting plate.
5. ADJUSTMENT OF CLOCK SPRING CONNECTOR
• Whenever the steering wheel is removed, before
reinstalling it, set the clock spring connector as
follows:
1. Set the front wheels straight ahead.
2. Turn the clock spring connector clockwise until
it stops. (Do not force it.)
3. Return the connector 2.75 turns.