Mazda MX-5 1990 Workshop Manual page 128

Steps After Installation
1 . Install the under cover.
OIL PUMP
2. Fill with the specified amount and type of engine oil. (Refer to page 0-5.)
3. Connect the negative battery cable.
4. Start the engine and check for leaks.
5. Check the oil level and add oil if necessary.
DISASSEMBLY I INSPECTION I ASSEMBLY
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Assemble in the reverse order of disassembly, referring to Assembly Note.
2
9
1. Oil seal
6. Spring seat
Disassembly Note ...................... page 0-12
7. Pressure spring
D
05UODX-022
05UODX-029
Assembly Note ........................... page 0-13
Inspection ................................... page D-12
2. Pump cover
Inspect for distortion or damage
3. Outer rotor
4. Inner rotor
5. Roll pin
8. Control plunger
Inspect for wear or damage
9. Pump body
Inspect for distortion or damage
D-11