Mazda MX-5 1990 Workshop Manual page 694

T
AUDIO
Cassette Tape Player (cont'd)
Function
Operation and procedure
Display
Tape direction change
• To change tape-playing direction, press PLAY/PRO
Dolby B noise reduction
• Press when using tape encoded with Dolby NR
05UOTX·238
Compact Disc (CD) Player
Caution
• The CD player cannot play 8 em (3.1 in) CDs. The smaller CD may dislodge from the adapter
and damage the disc or the player. Use only standard 12 em (4.7 in) CDs.
Function Operation and procedure Display
Disc insert • Push disc, label-side up, into slot. Auto-loading mechanism
will take over to set disc and begin play
Note
There will be short lapse of time between time disc is
set and play begins. This is because period of time is
necessary for disc player to read digital signal on disc.
When CD Is pressed while disc Is being played, play
will pause. Play will resume when CD is pressed again
Stopping/Playing CD • To stop CD play during playback without ejecting it, press
PLAY/STOP (CD will be in pause mode)
• To start playing CD again, press PLAY/STOP again
• To play loaded CD directly from radio or tape mode. press
PLAY/STOP
Ejecting/Reloading CD
• To eject CD, press EJECT/RELOAD
• To reload ejected CD. press EJECT/RELOAD again
Fast forwardlreverse
• To fast forward program, press
FF
• To reverse program. press REW
Repeat play
• To listen to program repeatedly. press RPT during play of
selection to be repeated
Music scan
• To scan play, press SCAN
• To cancel scan play. press SCAN again
Track search
• To search program tracks, press /\ (for forward) or V (for
reverse)
05UOTX·239
Clock
Note
• The clock can be set while radio or tapelCD player is ON.
Function
Operation and procedure
Time display
Time is normally displayed. Pushing CLOCK will automatically display current radio frequency
or mode for approx. five seconds before reverting to time mode.
Setting clock To adjust time. press CLOCK for approx. two seconds, current time will flash
To advance hours, press
A ,
to advance minutes, press
'V
Note
If time Is not adjusted while clock's current time is flashing (If neither
A
nor
'V
is
pressed) and CLOCK Is pressed second time, minutes will be set to 00.
If clock's current time setting Is within latter part of hour (from 30 to 59 min) hour
setting will automatically advance one hour.
To resume normal display, press CLOCK again
05UOTX-240
T-112