Steering Lock Mounting Bolts And Bracket - Mazda MX-5 1990 Workshop Manual

-,
MANUAL STEERING
N
05UONX-016
05UONX-018
Disassembly note
Steering lock mounting bolts and bracket
Use a chisel to make a groove in the heads of the steering
lock mounting bolts. Remove the bolts with a screwdriver. Re-
move the steering lock assembly.
Inspection
Check for the following and replace the column assembly if
necessary.
Steering shaft
1. Column bearing damage.
2. Steering shaft length.
Length: 583.3 ± 1.5mm (22.96 ± 0.06 in)
Assembly note
Steering lock mounting bolts and bracket
Install the steering lock assembly on the jacket. Install the new
steering lock mounting bolts. Tighten the bolts until the heads
break off.
N-11