Mazda MX-5 1990 Workshop Manual page 727

b
c
d
e
a
AIR BAG SYSTEM
T
05UOTX·391
05UOTX·392
05UOTX·393
Step 4
1 . Disconnect the S-sensor connectors.
2. Check continuity between terminals of the sensor.
Terminal Continuity Action
Yes
Replace wire harness
(b)-(e)
No Replace S-sensor
Step 5
1. Verify that the S-sensor is installed properly.
2. If the installation is poor, clean the mounting and tighten
the bolts.
3. If correct, go to Step 6.
Step 6
1. Disconnect the S-sensor connectors.
2. Check continuity between terminal of the sensor and a body
ground.
Terminal
Continuity Action
(a)-
Yes Replace S-sensor
Body ground
No Replace wire harness
T-145