EXHAUST SYSTEM
F
EXHAUST SYSTEM
COMPONENTS
Removal/Inspection /Installation
1. Remove in the sequence shown in the figure.
2. Check all components for damage, deterioration, and restriction and repair or replace as necessary.
3. Install in the reverse order of removal.
Note
• When installing the exhaust system components, tighten all fasteners to the specified torque.
CD
64-69 (6.5-9.1, 47-66)
\
31-46
(3.2-4.7, 23-34)
7.6-11 N·m
(60-110 em·kg, 69-95 In·lb)
1 . Main silencer
Inspect for deterioration and restriction
2. Catalytic converter
Inspect .. __ .................................. page F-122
-3
21-27 (2.1-2.8, 15-20)
N·m (m·kg, ft·lb)
05UOFX-178
3. Front exhaust pipe
I nspect for deterioration and restriction
4. Exhaust manifold
Inspect for damage
F-115