Emergency Locking Retractor (Elr); Webbing; Buckle Switch - Mazda MX-5 1990 Workshop Manual

s
SEATBEL T BUCKLE SWITCH
05UOSX-119
8-58
SEAT BELT
EMERGENCY LOCKING RETRACTOR (ELR)
Inspection
1. Verify that the belt can be pulled out smoothly, and that it
moves
smoothly when worn.
2. Verify that the retractor locks when the belt is quickly pulled.
3. Remove the retractor.
4. Hold the retractor as it would be installed.
5. Slowly incline the retractor while pulling out the belt.
6. Verify that the retractor locks at approx. 30 degrees incli-
nation.
WEBBING
Inspection
Inspect the webbing for scars, tears, and wear and for defor-
mation of the fittings.
BUCKLE SWITCH
Inspection
1. Disconnect the seatbelt buckle switch connector.
2. Check continuity of the switch.
Seatbelt Continuity
Buckled
No
Unbuckled
Yes
3. If continuity is not as specified, replace the switch.