Mazda MX-5 1990 Workshop Manual page 420

Hide thumbs Also See for MX-5 1990:

Table of Contents

.-;l' P .!p-a:"' u ..

tjl!!l·lII!'Iu~II-'

Ipl:lOj'I'*'

DIFFERENTIAL:

2. Install the bearing outer race (rear bearing) with the SST.

3. Adjust the drive pinion height as follows with the SST.

• Use the spacer that was removed.

4. Install the spacer and bearing inner race (rear bearing) onto

• Use the same spacer and nut removed during dis-

5_ Assemble the spacer, bearing inner race (rear bearing), and

Secure the SST with the O-ring_ Install this assembly in the

Install the bearing inner race (front bearing), the SST, com-

panion flange, washer, and nut.

6_ Tighten the nut just enough so that the companion flange

can still be turned by hand.

IPI:lOj'I1I.

Show Quick Links

Table of Contents

Troubleshooting