Mazda MX-5 1990 Workshop Manual page 731

AIR BAG SYSTEM
T
05UOTX-405
05UOTX-406
Step 4
1. Disconnect the D-sensor (LH) connectors, and check con-
tinuity between terminals of the sensor connector and a body
ground.
-]
Terminal
Continuity
b-Body ground Yes
2. If not as specified, go to Step 5.
3. If correct, replace the wire harness assembly.
Step 5
1. Check that all D-sensors (CNT, LH and RH) are properly
installed.
2. If an installation bolt is loose, tighten it.
3. If correct, replace the faulty D-sensor.
T-149