Cylinder Head - Mazda MX-5 1990 Workshop Manual

05UOBX-042
49 0636 100A
05UOBX-101
DISASSEMBL V
Disassembly Note
Camshaft pulley
1. Hold the camshaft with a wrench.
2. Remove the camshaft pulley lock bolt.
3. Remove the camshaft pulley.
Camshaft
B
1. Loosen the camshaft
ca~bolts
in two or three steps in the
order shown in the figure.
2. Remove the camshaft caps.
3. Remove the camshaft.
4. Remove the camshaft oil seal from the camshaft.
HLA
Caution
• Mark the HLA with a felt pen so that they can be rein-
stalled in the position from which they were
removed.
1. Remove the HLA from the cylinder head.
Cylinder head bolt
1. Loosen the cylinder head bolts in two or three steps in the
order shown in the figure.
2. Remove the cylinder head bolts.
Valve keeper
1. Set the SST against the upper valve spring seat as shown
in the figure.
2. Remove the valve keepers.
6-41