Mazda MX-5 1990 Workshop Manual page 785

u
U-42
AIR CONDITIONER
05UOUX·076
SNAP RING
ROTOR
9MUOUX-162
05UOUX-077
6. Disconnect the stator wires from the compressor housing.
7. Remove the snap ring and the stator.
8. Assemble in the reverse order of disassembly, referring to
Assembly note.
Assembly note
• Adjust the clearance between the pressure plate and
the rotor after referring to the table and selecting the
proper shims.
Standard clearance: 0.4-0.6mm (0.016-0.024 in)
Part No. Thickness
KA1061 L 12 0.10mm (0.004 in)
KA1061 L22 0.30mm (0.012 in)
KA1061 L23
0.50mm (0.020 in)