Trunk Lid Lock And Opener - Mazda MX-5 1990 Workshop Manual

s
TRUNK LID LOCK AND OPENER
TRUNK LID LOCK AND OPENER
COMPONENTS
Removal/Installation
1. Remove in the order shown in the figure.
2. Install in the reverse order of removal.
1. Trunk end trim
2. Trunk lid lock assembly
@
7.8-11 (0.8-1.1, 5.8-8.0)
7.8-11 (0.8-1.1, 5.8-8.0)
5
N·m (m·kg, ft.lb)
05UOSX-023
4. Rear finisher
Removal Note ............................. page S-28
Adjustment .......................................... below
5. Key cylinder
3. Rear combination light
6. Striker
Removal ......................................... Section T
r - - - - - - - - -___
========___,
Adjustment
05UOSX-024
8-18
Trunk lid lock assembly
Verify that the trunk lid can be closed easily and whether there
is any looseness. If necessary, loosen the lock assembly
mounting bolts and adjust the lock assembly.