Crank Angle Sensor - Mazda MX-5 1990 Workshop Manual

ON-VEHICLE MAINTENANCE
B
05UOBX·059
Steps After Installation
3. Install the camshaft pulley lock bolts.
4. Hold the camshaft with a wrench.
5. Tighten the camshaft pulley lock bolt.
Tightening torque:
49-61
N·m
(5.0-6.2
m-kg,
36-45
ft-Ib)
Crank angle sensor
1. Apply grease to a new O-ring and the blade.
2. Install the crank angle sensor and loosely tighten the instal-
lation bolt.
3. Connect the crank angle sensor connector.
1. Fill the radiator with the specified amount and type of engine coolant. (Refer to page E-5.)
2. Connect the negative battery cable.
3. Start the engine and check as follows:
(1) Engine coolant leakage.
(2) Ignition timing. (Refer to page 8-8.)
4. Recheck the engine coolant levels.
05UOBX·036
8-23