Mazda MX-5 1990 Workshop Manual page 741

CONNECTOR
Br,===~
(B~
AIR BAG SYSTEM '
T
05UOTX-447
05UOTX-448
Clock Spring Connector Assembly
1. Disconnect the negative battery cable.
2. Remove the knee protector and disconnect the clock spring
connectors (Orange and blue).
3. Remove the nuts and remove the air bag module.
4. Check continuity between terminals of the clock spring con-
nectors (blue) as shown.
--
Terminals
Continuity
Connector A Connector B
a A
Yes
b B
Yes
5. If not as specified, replace the clock spring connector.
Note
• The clock spring connector assembly is part of the
combination switch. When replacing the clock
spring connector assembly, replace it with combi-
nation switch as an assembly.
T-159