Harnesses; Water Bypass Pipe; Cylinder Head Bolt - Mazda MX-5 1990 Workshop Manual

B
ON-VEHICLE MAINTENANCE
Harnesses
1. Disconnect the harness connectors shown in the figure.
INJECTOR
05UOBX-042
8-18
Removal note
Water bypass pipe
IGNITION COIL
OXYGEN gENSOR
PIS PRESSURE SWITCH
05UOBX-040
1. Remove the exhaust manifold nut as shown in the figure.
2. Remove the water bypass pipe from the cylinder head as-
sembly.
Cylinder head bolt
1. Loosen the cylinder head bolts in two or three steps in the
order shown in the figure.
2. Remove the cylinder head bolts.
-.