Mazda MX-5 1990 Workshop Manual page 491

R
RIGHT WHEEL
-
POSITIVE
R-10
WHEEL ALIGNMENT
05UORX-022
-
Camber
Left wheel Right wheel
Front cam Rear cam Front cam Rear cam
Positive
Counter-
Clockwise Clockwise
Counter-
clockwise clockwise
Negative Clockwise
Counter- Counter-
Clockwise
clockwise clockwise
Note
• Turning the front cam one graduation changes the
camber about 15' and the toe-in about 2.8mm (0.11
in). Turning the rear cam one graduation changes
the camber about 6' and the toe-in about 2.8mm
(0.11 in).
• If the cam cannot be turned far enough to make the
adjustment, begin again at adjustment of the toe-
in using the other cam.
3_ Tighten the nuts_
Tightening torque=
73-95 N·m (7.4-9.7 m-kg, 54-70 ft-Ib)