CYLINDER BLOCK (INTERNAL PARTS)
Torque Specifications
12-18 N·m
ASSEMBLY
-~
CYLINDER WALLS.
B
(1.2-1.8 m-kg, 104-156 In-Ib)
50-54 (5.1-5.5, 37-40)
49 0221 061A
-~
JOURNALS AND
I
CRANK PINS
•
54-59 (5.5-6.0, 40-43)
05U08X-176
N·m (m-kg, ft-Ib)
05UOBX·175
Connecting Rod
1. Install one piston pin clip into the clip groove in the piston.
2. Assemble the piston and the connecting rod in the direc-
tion from which they were disassembled.
3. Apply clean engine oil to the piston pin.
4. Install the piston pin from the side opposite the clip.
5. Tap the piston pin in with the SST until the pin contacts the
clip.
If the pin cannot be installed easily, replace the connecting
rod.
B-61