Differential Mounting Rubber; Adjustment Of Pinion Height - Mazda MX-5 1990 Workshop Manual

97UOMX-068
97UOMX-069
e
.p,~uKef.ll·
FRONT REAR
05UOMX-097
,pllnKil .. ,.
05UOMX-098
M-36
DIFFERENTIAL
Differential mounting rubber
1. Drill holes around the differential mounting rubber.
Note
• Use a new mounting rubber when reassembling.
2. Hit the edge of the differential mounting rubber to remove it.
Assembly note
Differential mounting rubber
Note
• Install the mounting rubber with the voids facing
fore and aft.
Press in the new differential mounting rubber with the SST.
Press force: 2,000 kg (2 tons)
Oil seal (Output shaft)
Apply lithium based grease to the new oil seal lip and install
it with the SST.
Adjustment of pinion height
1. Install the bearing outer race (front bearing) with the SST.