Mazda MX-5 1990 Workshop Manual page 383

L
L-4
PROPELLER SHAFT
05UOLX-007
05UOLX-008
05UOLX-010
2. When the propeller shaft is removed from the extension
housing, immediately install the SST to prevent oil leakage.
INSPECTION
Propeller shaft
Note
• Clean the propeller shaft (except universal jOints)
thoroughly with a steam cleaner or cleaning solvent
before inspection.
1. Measure the propeller shaft runout with a dial indicator.
Replace the propeller shaft if runout is excessive.
Maximum runout: 0.4mm (0.016 in)
2. Move the universal joints in the directions shown, and check
for universal joint looseness.
If there is looseness, replace the propeller shaft.
3. Check operation of the universal joint.
If the universal joint has excessive resistance, replace the
propeller shaft.
Installation Note
1. Align the marks, and install the propeller shaft.
Tightening torque:
27-30 N·m (2.8-3.1 m-kg, 20-22 ft-Ib)
2. Check that there is no abnormal noise or vibration when
driving the vehicle.
If noise or vibration occurs from the propeller shaft, replace
the propeller shaft.